Technical Specs for Providing Batteries sets

For Optical Access Networks, Rural Exchanges, and UPS

電池用于光接入網電池，地方交換機和UPS

Technical Specs:規格要求

 First: Batteries for Optical Access Networks:第一，電池用于光接入網電池

1.Battery Nominal Voltage 12V.蓄電池額定電壓12V

2.Capacity /75/Ah. (Rejection Point)容量/75/Ah。（必須符合項）   

3.Each battery dimensions shouldn’t be more than (260X170X220 mm) in order for the existed Optical Access Networks cabinet to accommodate 8 batteries.       (Rejection Point)每個電池尺寸不應超過（260x170x220 mm），以便現有光接入網絡柜容納8個電池。（必須符合項）

4.The provided battery poles must be made of Lead and it must contain Absorbent glass mat (AGM)? flooded with acid.(Rejection Point)所提供的電池極必須由鉛制成，并且必須包含浸有酸液的吸收性玻璃墊（AGM）（必須符合項）

5.Must be (Deep Cycle).必須是（深循環）

The number of charge and discharge Cycles of the provided battery must be not less than 700 cycles at Discharge 50%.(Rejection Point)所提供電池的充電和放電循環數在放電50%時不得少于700個循環。（必須符合項） 

Second: Batteries for Rural Exchanges:電池用于地方交換機

1.Battery Nominal Voltage 12V.蓄電池額定電壓12V

2.Capacity /200/Ah. (Rejection Point)容量/200/Ah。（必須符合項）

3.Each set is composed of 4 batteries and each site needs /16/ batteries.每套由4節電池組成，每塊場地需要/16節電池

4.The provided battery poles must be made of Lead and it must be OPZV (Rejection Point).提供的電池極必須是鉛制的，必須是OPZV（必須符合項）

5.The number of charge and discharge Cycles of the provided battery must be not less than 1500 cycles at Discharge 80%.(Rejection Point)所提供電池的充電和放電循環數在放電80%時不得少于1500個循環。（必須符合項）

6.Suitable metal base must be provided for the batteries, weatherproof for all weather conditions like temperature, and humidity, and must provide easy installation and connection for batteries and must be suitable for the provided batteries to accommodate 16 batteries.必須為電池提供合適的金屬底座，在溫度和濕度等所有天氣條件下都能防風雨，并且必須為電池提供方便的安裝和連接，并且必須適合所提供的電池，以容納16個電池。

Third: Batteries for UPS:電池用于UPS

1.Battery Nominal Voltage 12V.蓄電池額定電壓12V。

2.Batteries Capacity according to attached table. (Rejection Point)電池容量見附表。（必須符合項）

3.Batteries dimensions according to attached table(Rejection Point)電池尺寸見附表（必須符合項）

4.Must be (Deep Cycle).必須是（深循環）

5.The provided battery poles must be made of Lead and it must contain Absorbent glass mat (AGM)? flooded with acid. (Rejection Point)所提供的電池極必須由鉛制成，并且必須包含浸有酸液的吸收性玻璃墊（AGM）。（必須符合項）

6.The number of charge and discharge Cycles of the provided battery must be not less than (1400 cycles for the 12V-7 Ah. and for all other requested types not less than 1600 cycles) at Discharge 80%.(Rejection Point)所提供電池的充放電循環次數不得少于（12V-7Ah為1400個循環）。對于所有其他要求的類型，不少于1600個循環），在排放80%時（必須符合項） 

Fourth: General conditions for all provided batteries:所有提供電池的一般條件：

1.The requested batteries and its capacities and dimensions must be according the attached tables.所需電池及其容量和尺寸必須符合附表

2.Offered batteries must be specialized for usage in Telecomm Equipments and must complied in operation with the existed rectifiers from the charging voltage, operation, and cells quantity.提供的電池必須是專門用于電信設備的，并且必須從充電電壓、操作和電池?cái)?shù)量上符合現有的整流器。

3.Batteries must be maintenance free type and outfitted with VALVE REGULATED LEAD ACID on the battery body.電池必須為免維護型，并在電池體上配備閥控鉛酸。

4.Batteries must operate in environmental temperature conditions (-20 to +50).電池必須在環境溫度條件下工作（-20至+50）

5.Batteries must be made by famous and reputable international companies and bidder must define the manufacturer company and country of manufacturing and manufacturing date clearly on the battery and it m